Lancing machinery
Liquid filling machines
Gravity, flowmeter and pump systems for free-flowing and low-viscosity liquids.
Explore this equipmentFrom process requirement to machinery route
Select filling, closing, labelling and end-of-line equipment.
Start with product behaviour, pack format and output. Then confirm contact materials, product feed, cleaning, changeovers, controls, guarding and inspection through a product trial.
Interactive starting point
Build an indicative line route.
This selector narrows the process. It does not replace product testing, packaging trials or a machinery risk and application review.
Equipment categories
Machinery for each stage of the line.
These examples use Lancing product imagery and link to relevant Lancing machinery resources.
Lancing machinery
Paste and viscous filling machines
Piston, servo-piston, rotor, lobe and progressive-cavity routes for pastes and creams.
Explore this equipment
Lancing machinery
Heated mixing and filling
Jacketed hoppers and temperature-controlled product paths for hot or molten products.
Explore this equipment
Lancing machinery
Powder and granule packing
Auger filling, weighing, counting, pouch filling and form-fill-seal systems.
Explore this equipment
Lancing machinery
Bottle and jar rinsing
Air cleaning, rinsing and washing options before filling where the validated process requires them.
Explore this equipment
Lancing machinery
Capping and closing
Screw caps, pumps, triggers, ROPP, vacuum lids and specialist closure application.
Explore this equipment
Lancing machinery
Vacuum jar capping
Controlled steam-vacuum closure application for suitable jar, lid and product processes.
Explore this equipment
Lancing machinery
Wrap-around labelling
Round-bottle and jar labelling with coding and optional inspection.
Explore this equipment
Lancing machinery
Front and back labelling
Flat, oval, rectangular and shaped-pack label application with product stabilisation.
Explore this equipmentThroughput planning
Choose the level of automation around the weekly requirement.
| Weekly output | Typical route | Key selection question |
|---|---|---|
| Under 500 | Desktop or manual-assist filler, closer and labeller | Can the operator load, fill, close and label safely without creating excessive handling? |
| 500–2,000 | Compact semi-automatic equipment | Which repetitive task limits labour most: filling, closure application or labelling? |
| 2,000–10,000 | Two-head or compact inline line | How will containers, closures and labels be fed and how often will the line change format? |
| 10,000+ | Multi-head automatic line with accumulation and inspection | Which station governs sustainable output and what independent checks are required? |
Need a complete line quotation?
Request a machinery reviewSend product, packaging and output details to Lancing.
The review can cover pre-fill preparation, filling, closing, labelling, coding, verification, conveyors and end-of-line packing.
Decision support
Calculate, compare and test the next production decision.
Use calculations, controlled diagnostics, side-by-side comparisons and documented acceptance criteria to move from a general idea to a robust machinery brief.
Packaging line output calculator
Estimate sustained good-pack output and expose the full-line bottleneck.
Open resource →Packaging-line troubleshooting
Diagnose common filling, capping, labelling, sealing and conveyor problems.
Open resource →Equipment comparisons
Compare alternative machinery principles against the same requirement.
Open resource →UK compliance planning
Structure safety, conformity, quantity-control and validation questions.
Open resource →