A practical production route
Use the eight stages below to compare the complete route for your product, from preparation and pack handling through to dispatch. For double cream, the critical issues are air pockets, stringing, emulsion damage, nozzle contamination and cosmetic pack marking.
Define the product window
Measure the production range for double cream: fill volume or weight, density, viscosity or flowability, temperature, largest inclusion, foam, chemistry and shelf-life process. Select equipment against the worst case, not the easiest sample.
Prepare and feed consistently
Prepare double cream to a repeatable specification and supply the filler through a covered hopper or pressure vessel, optionally with gentle sweep agitation. Control batch-to-batch variation and avoid long, restrictive or difficult-to-clean pipework.
Apply the required treatment
Mix double cream without entraining excess air. Define a stable temperature and resting time before filling so viscosity and dose behaviour remain repeatable.
Prepare the empty pack
Inspect empty cosmetic jars for damage, contamination and dimensional variation. Rinse, air-clean or sterilise only where the product risk assessment and packaging specification require it.
Fill accurately and cleanly
Use a piston, servo-piston, progressive-cavity or lobe-pump filler. Avoid aeration and preserve texture while achieving a clean, repeatable cut-off. Set the nozzle and container handling so the outside of the cosmetic jars remains clean for closing and labelling.
Close or seal the pack
Apply screw lids and liners with repeatable torque or force. Include cap/closure presence detection and a routine check of opening performance, leakage and tamper evidence.
Label, code and verify
Apply wrap-around, front-and-back, top or tamper-evident labels as required by the cosmetic jars. Add batch/date coding and use vision or barcode checks where label mix-up is a material risk.
Inspect and pack for distribution
Check fill quantity, pack integrity, code and presentation before accumulating or case packing. Confirm the finished cosmetic jars survives handling, sleeve wrapping, case packing, palletisation and transport.
Equipment options for double cream
These machine types provide an initial route. Dose range, contact materials, output, utilities, change parts and controls should be agreed after a representative product and pack trial.
Recommended filling routePneumatic paste and cream filler
A practical starting point for double cream: piston, servo-piston, progressive-cavity or lobe-pump filler with product-specific contact parts and controls.
View Lancing solutions
Closing and sealingAutomatic closure application
Apply and tighten screw lids and liners with controlled torque, force or position.
View Lancing solutions
Labelling and codingAutomatic labelling system
Apply labels and traceability data to cosmetic jars, with inspection where mix-up risk justifies it.
View Lancing solutionsEngineering, safety and quality controls
Product behaviour
Test viscosity, density, foaming, particle size or flowability using production-representative double cream. Avoid aeration and preserve texture while achieving a clean, repeatable cut-off.
Operator protection
Guard access to moving tooling and control exposure to double cream. Address air pockets, stringing, emulsion damage, nozzle contamination and cosmetic pack marking in the machinery and process risk assessment.
Cleaning and changeover
Plan for sanitary, easily stripped contact parts with documented product recovery and wash steps. Confirm recovery, flushing, allergen or chemical segregation and safe disposal before purchase.
Pack validation
Run the actual cosmetic jars and screw lids and liners through filling, closing, labelling and transit tests. Supplier drawings alone do not show real production variation.
Selecting equipment by weekly throughput
| Weekly volume | Typical equipment level | Planning approach |
|---|---|---|
| Under 500 | Desktop or manual-assist | Prioritise low changeover time, flexible tooling and safe repeatability. |
| 500–2,000 | Compact semi-automatic | Separate filler, closer and labeller can provide a practical step up without a full conveyor line. |
| 2,000–10,000 | Two-head or compact inline | Use controlled product feed, powered conveyors and automatic closing or labelling where labour is the constraint. |
| 10,000+ | Multi-head automatic line | Balance every station, include accumulation and specify inspection, rejection and end-of-line handling. |
Prove the line with your product and packaging
The most useful test uses the final double cream, cosmetic jars, screw lids and liners, label and code. Include the most difficult size or formulation, not only the easiest product.
Discuss this applicationCommon questions about filling double cream
What filling machine is best for double cream?
A piston, servo-piston, progressive-cavity or lobe-pump filler is the usual starting point because double cream behaves as a shear-sensitive or viscous personal-care, healthcare or technical formulation requiring controlled positive displacement. The actual choice depends on dose, temperature, inclusions, required accuracy, cleaning regime and output.
Can double cream be filled into cosmetic jars?
Yes, provided the cosmetic jars, screw lids and liners and product are compatible. Test dimensional variation, fill temperature, headspace, leakage, closure performance, label adhesion and distribution before specifying the line.
Should double cream be filled hot or cold?
Double Cream is commonly handled with held inside the formulation window to protect viscosity and stability. The final temperature must come from the validated formulation, preservation method, pack material and closure process.
How do you achieve a clean fill with double cream?
Use a positive shut-off nozzle, tune fill acceleration and position, and keep the cosmetic jars stable. Product trials determine whether a piston, pump or gravity method gives the cleanest result.
How should cosmetic jars be closed after filling double cream?
Apply screw lids and liners with repeatable torque or force. Include cap/closure presence detection and a routine check of opening performance, leakage and tamper evidence.
What output can a double cream filling line achieve?
Output depends on dose size, pack handling, fill time, closure method, cleaning and operator loading. As a planning guide: desktop equipment suits under 500 packs/week, compact systems 500–2,000, two-head lines 2,000–10,000 and multi-head systems 10,000+.
What samples are needed to test double cream?
Supply representative double cream, the complete cosmetic jars, screw lids and liners, labels and any coding specification. Include the full product range, especially the highest viscosity, largest inclusion or most difficult pack size.