A practical production route
Use the eight stages below to compare the complete route for your product, from preparation and pack handling through to dispatch. For softgel supplements, the critical issues are count errors, chipped units, cross-contamination and incorrect label or batch data.
Define the product window
Measure the production range for softgel supplements: fill volume or weight, density, viscosity or flowability, temperature, largest inclusion, foam, chemistry and shelf-life process. Select equipment against the worst case, not the easiest sample.
Prepare and feed consistently
Prepare softgel supplements to a repeatable specification and supply the filler through a low-impact hopper and vibratory channels that separate units without damage. Control batch-to-batch variation and avoid long, restrictive or difficult-to-clean pipework.
Apply the required treatment
Apply formal line clearance and batch control for softgel supplements. Remove broken units and verify the counter remains accurate at the chosen channel speed.
Prepare the empty pack
Inspect empty glass jars for damage, contamination and dimensional variation. Rinse, air-clean or sterilise only where the product risk assessment and packaging specification require it.
Fill accurately and cleanly
Use a electronic counter, channel counter, tablet counter or blister feed system. Verify count accuracy, dust effects, broken units and container presence. Set the nozzle and container handling so the outside of the glass jars remains clean for closing and labelling.
Close or seal the pack
Apply screw caps and tamper evidence with repeatable torque or force. Include cap/closure presence detection and a routine check of opening performance, leakage and tamper evidence.
Label, code and verify
Apply wrap-around, front-and-back, top or tamper-evident labels as required by the glass jars. Add batch/date coding and use vision or barcode checks where label mix-up is a material risk.
Inspect and pack for distribution
Check fill quantity, pack integrity, code and presentation before accumulating or case packing. Confirm the finished glass jars survives handling, sleeve wrapping, case packing, palletisation and transport.
Equipment options for softgel supplements
These machine types provide an initial route. Dose range, contact materials, output, utilities, change parts and controls should be agreed after a representative product and pack trial.
Recommended filling routeCounting and packing system
A practical starting point for softgel supplements: electronic counter, channel counter, tablet counter or blister feed system with product-specific contact parts and controls.
View Lancing solutions
Closing and sealingAutomatic closure application
Apply and tighten screw caps and tamper evidence with controlled torque, force or position.
View Lancing solutions
Labelling and codingAutomatic labelling system
Apply labels and traceability data to glass jars, with inspection where mix-up risk justifies it.
View Lancing solutionsEngineering, safety and quality controls
Product behaviour
Test viscosity, density, foaming, particle size or flowability using production-representative softgel supplements. Verify count accuracy, dust effects, broken units and container presence.
Operator protection
Guard access to moving tooling and control exposure to softgel supplements. Address count errors, chipped units, cross-contamination and incorrect label or batch data in the machinery and process risk assessment.
Cleaning and changeover
Plan for product-dedicated or validated cleanable contact paths with line clearance controls. Confirm recovery, flushing, allergen or chemical segregation and safe disposal before purchase.
Pack validation
Run the actual glass jars and screw caps and tamper evidence through filling, closing, labelling and transit tests. Supplier drawings alone do not show real production variation.
Selecting equipment by weekly throughput
| Weekly volume | Typical equipment level | Planning approach |
|---|---|---|
| Under 500 | Desktop or manual-assist | Prioritise low changeover time, flexible tooling and safe repeatability. |
| 500–2,000 | Compact semi-automatic | Separate filler, closer and labeller can provide a practical step up without a full conveyor line. |
| 2,000–10,000 | Two-head or compact inline | Use controlled product feed, powered conveyors and automatic closing or labelling where labour is the constraint. |
| 10,000+ | Multi-head automatic line | Balance every station, include accumulation and specify inspection, rejection and end-of-line handling. |
Prove the line with your product and packaging
The most useful test uses the final softgel supplements, glass jars, screw caps and tamper evidence, label and code. Include the most difficult size or formulation, not only the easiest product.
Discuss this applicationCommon questions about filling softgel supplements
What filling machine is best for softgel supplements?
A electronic counter, channel counter, tablet counter or blister feed system is the usual starting point because softgel supplements behaves as a countable solid dose that normally requires controlled feeding, counting and container verification. The actual choice depends on dose, temperature, inclusions, required accuracy, cleaning regime and output.
Can softgel supplements be filled into glass jars?
Yes, provided the glass jars, screw caps and tamper evidence and product are compatible. Test dimensional variation, fill temperature, headspace, leakage, closure performance, label adhesion and distribution before specifying the line.
Should softgel supplements be filled hot or cold?
Softgel Supplements is commonly handled with ambient under controlled humidity where required by the product specification. The final temperature must come from the validated formulation, preservation method, pack material and closure process.
How is the count checked for softgel supplements?
Use an electronic counter with product-specific channel settings, broken-unit control and periodic count verification. Vision or checkweighing can provide an additional independent check.
How should glass jars be closed after filling softgel supplements?
Apply screw caps and tamper evidence with repeatable torque or force. Include cap/closure presence detection and a routine check of opening performance, leakage and tamper evidence.
What output can a softgel supplements filling line achieve?
Output depends on dose size, pack handling, fill time, closure method, cleaning and operator loading. As a planning guide: desktop equipment suits under 500 packs/week, compact systems 500–2,000, two-head lines 2,000–10,000 and multi-head systems 10,000+.
What samples are needed to test softgel supplements?
Supply representative softgel supplements, the complete glass jars, screw caps and tamper evidence, labels and any coding specification. Include the full product range, especially the highest viscosity, largest inclusion or most difficult pack size.